Brick Slip Accessories
Showing all 7 results
-
Brick Slip Sealer
Brick Slip Seal & Protect is a high performance surface treatment designed to protect brick slips from moisture, staining, and environmental damage without altering their appearance.
- Coverage: 1L = 3 to 5m2
- Suitable for interior and exterior brick slips
- Prevents liquid ingress while remaining vapour permeable
- 1-3 applications recommended (apply coats wet on wet)
- Helps reduce surface degradation by repelling contaminants
- Resists moss, lichen, and freeze/thaw damage
- Colourless finish that doesn’t alter the look of brick slips
- UV resistant, non-flammable, non-toxic
- Environmentally friendly
- Easy application by spray, brush, or roller
From:£12.81£15.37Ex VATInc VAT Add to cart -
Brick Slip T-Spacers – Pack of 220
10mm T-Spacers are designed for brick slip application, to ensure an accurate 10mm space is left between each side of every brick slip. A simple T-shape design allows these to be removed once the adhesive has set, leaving brick tiles ready for the pointing mortar.
A pack of 220 spacers will cover approximately 3-5 m2.
£9.47£11.36 Ex VATInc VAT Add to cart -
Slip Trak External Brick Slip Panel A1 GRC 600mm x 1250mm
Slip Trak is a brick slip tracking cladding panel that can be used for small and large brick slip applications to speed up the installation process of external and internal projects. These panels are A1 fire rated and offer high level of dimensional stability. Once tracker panels are installed, brick slips can be fitted.
- 600mm x 1250mm x 13mm (8mm inset thickness)
- Suitable for 65mm high brick slips
- Water and frost resistant
- Non-combustible, A1 Class
- Can be used with all types of façade solutions
- Extensively used on: steel frame & timber frame structures, traditional buildings
- Suitable for both Internal & External Brick Slip applications
£27.60£33.12 Ex VATInc VAT Add to cart -
Slip-Fix Brick Slip Adhesive 20kg
Slip-Fix Brick Slip Adhesive for internal and external use. It is formulated for fixing brick slips to a range of substrates, including sand and cement render, brick and block work.
- Wall or floor applications
- Frost resistant, for use in all weather
- Applied to a thickness of 3mm – 20mm
- Suitable for brick slips and natural stone
- Can be used with external wall installation systems
- Extended workability
- Suitable for underfloor heating
- Supplied in 20kg paper bag
A 20kg bag will cover approximately 4.25 m2 at the recommended application thickness of 3mm.
£21.73£26.08 Ex VATInc VAT Add to cart -
Slip-Point Brick Slip Grey Mortar 20kg
Slip-Point is a specialist pointing mortar for Brick slips, it provides a quick and clean method of jointing both horizontal and vertical brick slips. The Slip-Point gun injected mortar has been specifically designed to be used with a hand-held mortar gun, however, it can still be traditionally applied by trowel. The light and pliable texture of Slip-Point makes it fast and convenient to work with, and the hand-held mortar gun allows intricate areas to be grouted neatly.
- Mixed easily on-site with water
- Excellent compatibility and colour consistency
- Resistance to freeze/thaw weather conditions
- Suitable for both Internal & External Brick Slip applications
- Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs
- Shrinkage compensated
- Conforms to BS 7533
- Supplied in 20kg paper bags
A 20kg bag will cover approximately 3-5 m2 when laid in stretcher bond using a standard 10mm recessed mortar joint.
*Increasing the mortar joint width and depth and jointing style will reduce the coverage!
£21.73£26.08 Ex VATInc VAT Add to cart -
Slip-Point Brick Slip Sandstone Mortar 20kg
Slip-Point is a specialist pointing mortar for Brick slips, it provides a quick and clean method of jointing both horizontal and vertical brick slips. The Slip-Point gun injected mortar has been specifically designed to be used with a hand-held mortar gun, however, it can still be traditionally applied by trowel. The light and pliable texture of Slip-Point makes it fast and convenient to work with, and the hand-held mortar gun allows intricate areas to be grouted neatly.
- Mixed easily on-site with water
- Excellent compatibility and colour consistency
- Resistance to freeze/thaw weather conditions
- Suitable for both Internal & External Brick Slip applications
- Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs
- Shrinkage compensated
- Conforms to BS 7533
- Supplied in 20kg paper bags
A 20kg bag will cover approximately 3-5 m2 when laid in stretcher bond using a standard 10mm recessed mortar joint.
*Increasing the mortar joint width and depth and jointing style will reduce the coverage!
£21.73£26.08 Ex VATInc VAT Add to cart -
Slip-Point Brick Slip White Mortar 20kg
Slip-Point is a specialist pointing mortar for Brick slips, it provides a quick and clean method of jointing both horizontal and vertical brick slips. The Slip-Point gun injected mortar has been specifically designed to be used with a hand-held mortar gun, however, it can still be traditionally applied by trowel. The light and pliable texture of Slip-Point makes it fast and convenient to work with, and the hand-held mortar gun allows intricate areas to be grouted neatly.
- Mixed easily on-site with water
- Excellent compatibility and colour consistency
- Resistance to freeze/thaw weather conditions
- Suitable for both Internal & External Brick Slip applications
- Suitable for use around heat sources such as Stoves, Log Burners and kitchen hobs
- Shrinkage compensated
- Conforms to BS 7533
- Supplied in 20kg paper bags
A 20kg bag will cover approximately 3-5 m2 when laid in stretcher bond using a standard 10mm recessed mortar joint.
*Increasing the mortar joint width and depth and jointing style will reduce the coverage!
£21.73£26.08 Ex VATInc VAT Add to cart



